Honeycomb blinds offer an attractive alternative to venetian or roller blinds, and they're just as simple to install as any other type. Follow the instructions below and you'll have your pleated blind installed in no time. If you need any assistance along the way please give us a call or start a live chat with our highly trained customer support team. You will need to provide your own screws as the type required varies greatly depending upon the surfaces you are fixing to. You will need 4mm diameter screws, suitable for the material you are installing into.
What You'll Need
To install your new blinds you will need the below tools.
Metal Tape Measure
Drill
Nut & Bolt
Screwdriver
Brackets
Pencil
Fitting Instructions - Free Hanging
Ensure that brackets are positioned a suitable distance away from any window, door handles or any other obstructions to allow the blind to
operate smoothly.
Step 1
Recess Fitting
Outside Recess
If you are mounting the Honeycomb blind outside the window recess, ensure that dimension C is the same on both sides. Follow the instructions for wall mounting. To calculate C, use the formula: (A-B)/2.
Inside Recess
For ceiling mounting, attach the blind to the lining. For wall mounting, attach it to the window frame.
Roof Assembly
Measure and mark the distance between the wall and the back of the bracket, considering any obstacles like protruding handles. Position the mounting brackets evenly along the Honeycomb curtain. Hold each bracket in place and mark the hole locations. Ensure the screws you use are appropriate for the wall or surface you are mounting on.
Step 2
Wall Mount
Assemble the roof bracket with the other bracket. Use the nuts and bolts provided to assemble them. Use the image above to understand how to put them together.
Step 3
Inserting the Headrail
Insert the head rail into the brackets as shown, then push it up until it clicks into place completely.
Step 4
Child Safety
The safety device must be mounted as close to the top rail as possible and always at least 1500 mm above the floor.
The cord must be completely wrapped around the safety device when the Honeycomb blind is not in use.
Place the safety device in the desired position on the wall and mark the hole positions with a pencil. Use suitable screws to securely fasten the safety device to the wall.
Wrap the ropes around the safety device. When the ropes are wound - make sure they are wound properly.
NOTE! - CHILDREN CAN BE INJURED IF A SAFETY DEVICE IS NOT INSTALLED. ALWAYS USE A SAFETY DEVICE TO KEEP ROPES AND CHAINS OUT OF THE REACH OF CHILDREN.
Attaching the Safety Cleat
There is a safety cassette on the ropes so that it breaks when a strong horizontal pull occurs on the ropes to reduce the risk of getting stuck. Use suitable screws to attach the safety cleat securely to the wall.
Wrapping the Cords
Wrap the cords around the cord cleats in a figure of 8.
When the cords are fully accumulated
ensure they are secure so when any cord
is pulled no excess cord is released.
Step 5
Operation
To lower blind: Move the cord to the center of the Honeycomb curtain and slowly pull down until the string catch releases.
To raise blind: Pull the cord until the Honeycomb curtain has reached the desired height.
To lock cords: Pull the cord to the outside of the Honeycomb curtain (upwards), the curtain should now close automatically.
Important Note
Breakaway Safety Tassel
Breakaway safety tassel is pre-fitted to the lift cords so that when a horizontal force is applied to the cords entering the tassel it safely breaks away eliminating any hazardous loops.
If the breakaway safety tassel is pulled apart untangle and untwist cords.
For 2 cords: Press the breakaway safety tassel together until it is fully closed.
For 3 cords: Place the loose cord in the opening in one half of the breakaway safety tassel and press the breakaway safety tassel together until it is fully closed.
If there are any doubts that the breakaway safety tassel has not been re-attached correctly it can tested by placing your arm between the cords and pressing downwards. The breakaway safety tassel should break apart with minimal force.
Fitting Instructions - Tensioned
Ensure that brackets are positioned a suitable distance away from any window, door handles or any other obstructions to allow the blind to
operate smoothly.
Step 1
Recess Fitting
Outside Recess
If you are mounting the Honeycomb blind outside the window recess, ensure that dimension C is the same on both sides. Follow the instructions for wall mounting. To calculate C, use the formula: (A-B)/2.
Inside Recess
For ceiling mounting, attach the blind to the lining. For wall mounting, attach it to the window frame.
Roof Assembly
Measure and mark the distance between the wall and the back of the bracket, taking into account obstacles such as protruding handles. The mounting brackets should be placed evenly over that Honeycomb curtain. Hold each fastener in its intended location and mark the hole locations. Make sure the screws you use are suitable for the wall/surface you are mounting on.
Step 2
Wall Mount
Assemble the roof bracket with the other bracket. Use the nuts and bolts provided to assemble them. Use the image above to understand how to put them together.
Step 3
Inserting the Headrail
Insert the head rail into the brackets as shown, then push it up until it clicks into place completely.
Step 4
Brackets
Pull down the Honeycomb blind and use a pencil to mark where the window brackets should be positioned at the bottom. After marking, use suitable screws to attach the brackets to each corner.
Attaching the Safety Cleat
There is a safety cassette on the ropes so that it breaks when a strong horizontal pull occurs on the ropes to reduce the risk of getting stuck. Use suitable screws to attach the safety cleat securely to the wall.
Step 5
Operation
To lower blind: Move the cord to the center of the Honeycomb curtain and slowly pull down until the string catch releases.
To raise blind: Pull the cord until the Honeycomb curtain has reached the desired height.
To lock cords: Pull the cord to the outside of the Honeycomb curtain (upwards), the curtain should now close automatically.
We use Cookies
We use cookies and similar technologies to give you a personalised shopping experience, personalised advertising and to analyse our web traffic.
Necessary cookies help make a website usable by enabling basic functions like page navigation and access to secure areas of the website. The website cannot function properly without these cookies.
Preference cookies enable a website to remember information that changes the way the website behaves or looks, like your preferred language or the region that you are in.
Statistics
Statistic cookies help website owners to understand how visitors interact with websites by collecting and reporting information anonymously.
Marketing
Marketing cookies are used to track visitors across websites. The intention is to display ads that are relevant and engaging for the individual user and thereby more valuable for publishers and third-party advertisers.
Unclassified
Unclassified cookies are cookies that we are in the process of classifying, together with the providers of individual cookies.